How do I fix my Razer mouse buttons not working?
Check and download any available firmware updates for your device. Use a can of compressed air to gently blow away any accumualted dirt under the affected button. Test the mouse with a different system without Synapse if applicable. Reset your Razer mouse’s Surface Calibration.
How do I turn on the side buttons on my Razer mouse?
Open Razer Synapse. Click on the Razer mouse. Go to the “CUSTOMIZE” tab. Click on the button you wish to set to default commands to.
How do I change the side buttons on my Razer Naga?
Step-by-step process
- Open Razer Synapse 3.
- Select the device you want to customize under “DEVICES”.
- Select the key or button you want to modify.
- Select your preferred function such as Keyboard Function, Mouse Function, Macro, Inter-Device, and more.
- Click “SAVE”.
How do I reset my Razer Naga mouse?
You can do this while the mouse in on in either wired or wireless mode, by holding down the left mouse button, the right mouse button, and the scroll wheel (middle mouse button) at the same time, for 5 seconds to reset the mouse.
Why are my side mouse buttons not working?
It is likely that either the mouse buttons are not recognized as individual buttons, or there is no default action assigned to these buttons. The solution depends on what program you are trying to use these buttons in. Operating System: Only mouse 1 and 2 (left click and right click) will have default actions assigned.
How do I fix my Razer mouse?
Unplug your Razer mouse from your computer. Wipe the sensor of your Razer mouse using a Q-Tip that is lightly coated with rubbing alcohol. Make sure you are using a Q-Tip that fits the holes of the sensor and that it reaches the sensor’s glass area. Once done, let this dry completely and try the Razer mouse again.
How do I make the side buttons on my mouse work?
More Information
- Click Start, and then click Control Panel.
- Double-click Mouse.
- Click the Buttons tab.
- Under Button Assignment, click the box for a button to which you want to assign a function, and then click the function that you want to assign to that button.
- Click Apply, and then click OK.
- Close Control Panel.
How do you check if mouse side buttons are working?
How to test your mouse
- Slowly, one by one, click and hold different buttons on your mouse.
- Check if the correct part of the mouse lights up the picture when pressing a button (or scrolling the wheel).
- If all the buttons on the picture light up and no double clicks were detected then your mouse is working properly.
How do I update my Naga firmware?
Step-by-step Process
- Download the latest firmware update from the link found above.
- Close Razer Synapse and all other running applications before proceeding with the update.
- Run the updater.
- You may be prompted to confirm changes on your device by the User Account Control.
- Click “NEXT” to proceed.
How do you bind side mouse buttons?
How do I fix my Razer keyboard keys not working?
Razer Cynosa, BlackWidow, and Huntsman Unplug the keyboard. Press and hold “Escape”, “Caps Lock”, and the space bar. Plug the keyboard into a USB port. Release all keys.
How do I activate Razer Hypershift?
Select the “HYPERSHIFT” option on the left side of the Synapse window. Click “SAVE” to complete the process. The assigned button will appear in the device layout as “Razer Hypershift”. To use Razer Hypershift, hold down the “Razer Hypershift” button and click on the other button with a secondary command.
What is the M and G on Razer keyboard?
M is for macro recording mode and G is for gaming mode.
Do the side buttons on the Razer Naga Molten edition work?
I can confirm that the side buttons work using a Razer Naga Molten Edition… like Flamemonkey said, if they’re not working, check the switch on the bottom of the mouse. One mode emulates the numbers across the top of the keyboard, the other emulates a numpad (and on a PC can respond to the numlock key).
How to adjust DPI on Razer Naga?
Finally, did you adjust the DPI in the Razer Naga Configurator? It’s the second tab called “Tweak Performance”. You’ll want to set your DPI to max, adjust polling rate to 125 hz, and turn off acceleration. Hit “OK” or “Apply” and your settings should be saved to the mouse.
Is there a support forum on Razer insider?
Just a friendly reminder, Razer Insider is not a support forum. (You must log in or sign up to reply here.) Not open for further replies. Start a thread to get Community and Official Support.
Is it worth it to switch from Razer to Corsair?
My best bit of advice would be to switch to Corsair for more reliable, and durable external hardware. I for one am never touching another Razer Product for as long as I live.